1. What do you need to install your Aimo LabelWriter?
Before you begin, it’s helpful to have everything ready. You’ll need:
-
Your Aimo label printer.
-
The included power adapter and, if needed, a USB cable.
-
A computer with Windows or macOS, depending on your printer model.
-
A roll of labels suitable for your Aimo printer.
-
The correct printer driver and any label software you may need.
Note: the required software varies by Aimo model. So first check the model number on the bottom or back of your printer.
2. Download the correct Aimo driver
To enable your computer to communicate with the label printer, you usually need a printer driver. It allows your computer to recognize the printer and send commands to it.
Follow these steps:
-
Go to the official Aimo support page.
-
Find your printer model in the list.
-
Select the driver for your operating system, such as Windows or macOS.
-
Download the correct installation file.
-
Open the file and follow the on-screen instructions.
Depending on the model, you may also need label software to design and print labels. Aimo offers software such as Labelife for various printer series.
Always download the software for your specific printer model. https://www.aimotech.com/service/
3. Connect the Aimo label printer
Once you have downloaded the correct software, you can connect the printer.
For a USB connection:
-
Connect the power adapter to the printer.
-
Turn on the printer.
-
Connect the printer to your computer using the USB cable.
-
Follow any additional instructions from the installer.
Some models require you to connect the USB cable only when prompted by the installer. In that case, follow the on-screen instructions.
For a wireless connection:
Does your Aimo printer have Wi-Fi or Bluetooth? If so, follow the connection instructions for your specific model. Not every Aimo label printer supports a wireless connection.
4. Load the labels into the printer
Now that the printer is connected, you can load the labels.
-
Open the printer cover.
-
Place the label roll in the designated holders.
-
Check that the labels are facing the right way.
-
Feed the beginning of the label roll through the designated opening.
-
Close the printer cover.
Ensure that the roll can move freely and the labels feed straight through the printer.
Many label printers can detect the label size or calibrate its position. If your Aimo model supports this feature, you can use the designated button or software setting.
Always use labels that match your printer's maximum width, roll diameter, and core size.
5. Set the correct label size
A common cause of printing problems is an incorrectly configured label size.
Open the label software or your computer's print settings and check the following:
-
Label width: the width of the label in millimeters.
-
Label height: the length of the label in millimeters.
-
Orientation: portrait or landscape, depending on the design.
-
Scale: make sure the design prints at 100% when needed.
For example, if you use 102 x 150 mm shipping labels, set the same size in the software, provided your printer supports it.
Also check that your shipping platform is using the correct paper size. This prevents addresses, barcodes, or other information from being partially outside the label.
6. Print your first test label
Is the installation complete? Then it's time to test that everything works properly.
-
Open the label software or program you want to use to print labels.
-
Create a simple test label or open an existing label file.
-
Select the Aimo printer as the print device.
-
Check the label size.
-
Print one test label.
Then check that the text is sharp, the label feeds correctly, and all the information stays within the edges.
Is everything working properly? Then you can use the printer for your shipping labels, product labels, or other labels.
7. Troubleshooting common installation problems
Sometimes a printer does not work immediately after installation. The checks below can help you resolve the most common problems.
The computer does not recognize the printer
Check that the printer is turned on and the cable is connected properly. Also check that the correct driver for your model and operating system is installed.
You can also try a different USB port and restart the printer and computer.
Labels are printing at the wrong size
Check the dimensions in both your label software and print settings. They must match the size of the labels in the printer.
The printer feeds multiple labels
Check that the roll is loaded correctly and that the labels feed straight through the printer. If possible, perform the calibration procedure described in your model's manual.
The printout is incomplete or difficult to read
Check that you're using the correct type of labels and that the print settings are correct. If problems persist, consult your printer's manual.
8. Which labels do you need for your Aimo LabelWriter?
The right labels are important for a good print and trouble-free operation. When choosing a label roll, pay attention to the dimensions, core diameter, maximum roll diameter, and the type of labels supported by your printer.
Do you mainly use the printer to ship packages? Then shipping labels in the format used by your shipping platform are a logical choice.
Want to print product labels or address labels? Check which size is best suited to your application.
At Crazylabels, you'll find different types of labels for a variety of uses. When choosing, always check that the specifications are compatible with your Aimo printer.
Conclusion: your Aimo LabelWriter is ready to use
Installing an Aimo LabelWriter consists of a few straightforward steps: downloading the correct driver, connecting the printer, loading the labels, and setting the label format.
By checking in advance which Aimo model you have and which labels are compatible with it, you can prevent common installation problems.
Do you have questions about installing your Aimo label printer or are you unsure which labels are suitable? Then contact Crazylabels. We'd be happy to help you find the right solution.
|
Small address labels |
|
|
Dymo 99010, 99012 or 11352 |
|
|
Colored price and warehouse labels |
|
|
Wide shipping labels of 102 × 150 mm |
|
|
Both small labels and wide shipping labels |